恒溫恒濕培養箱的材質結構和控制特點分別是什么呢？下面，我們一起了解一下吧!

What are the material structure and control characteristics of constant temperature and humidity incubator? Next, let's solve it together

恒溫恒濕培養箱的控制器機殼由鋁合金橋架、薄鋼板構成。內部裝有溫度測量、溫度調節和電源控制等裝置。不僅能測量溫度，并且還能自動地控制溫度在給定范圍內。

The control case of the incubator is composed of an aluminium alloy bridge and a thin steel plate. Inside is equipped with temperature measurement, temperature regulation and power control devices. It can not only measure the temperature, but also automatically control the temperature in a given range.

1000℃型的恒溫恒濕培養箱爐膛采用碳化硅制成長方形，在爐膛與爐殼之間用絕熱保溫材料(輕質粘土后硅酸鋁纖維氈)填砌隔熱，發熱元件分段穿入爐膛長槽孔中。爐膛后壁上方設有測量溫度用小孔，熱電偶由此插入。

The furnace of 1000 C constant temperature and humidity incubator is made of silicon carbide rectangular. Thermal insulation material (aluminium silicate fiber felt after light clay) is used to fill the heat insulation between the furnace and the shell. The heating element is piecewise penetrated into the long groove hole of the furnace. A small hole for measuring temperature is arranged above the back wall of the furnace, and the thermocouple is inserted therefrom.

恒溫恒濕培養箱還有一個亮點——控制特點：該控制是升級換代產品，電器部分采用可控硅模塊，選用TCW調節儀使控溫精度達到±1℃，而且該控制還具備電流限幅功能。可以設定時間。

The constant temperature and humidity incubator also has a bright spot - control characteristics: the control is upgraded and replaced products, the electrical part uses silicon controlled module, and TCW regulator is selected to make the temperature control accuracy reach (+1 C), and the control also has the function of current limiting. Time can be set.

以上就是恒溫恒濕培養箱廠家給大家帶來的資訊介紹，了解更多的相關知識介紹，歡迎關注我們的官方網站。

Above is the constant temperature and humidity incubator manufacturer to bring you information, learn more about the relevant knowledge, welcome to pay attention to our official website.

http://www.jiangmeiren.com.cn/